Cavcon concrete street signs are designed by a professional engineer. They are also produced in our quality production facility, and backed by over 40 years of experience.
Cavcon precast signs have been marketed in South Africa for over 15 years, and are specified by consulting engineers and municipalities for new residential developments, existing areas, and remote areas.
Cavcon signs are especially suited for areas of high theft risk. Some features of this fine range of signs are:
Cavcon street name signs are made to order. The normal delivery time is approximately 2-3 weeks.
Specification for Sign Posts
The concrete shall consist of 13mm quartzitic stone, Swartkops River sand and Portland Cement, weigh-batched to produce a mix which has an average compressive strength of 50MPa at 28 days for 150mm test cubes.
The mix shall be compacted by vibration in steel moulds, to produce dense concrete.
The posts shall be prestressed with four 5mm diameter crimped prestressing wires which shall be accurately positioned in the four corners of the moulds to give a concrete coverage of 20mm.
The prestressing wire shall comply with B.S. 5896:1980 having a yield stress of approximately 1500MPa and Young’s Modulus of approximately 200GPa.
The prestressing wires shall be equally tensioned in the moulds by a force producing an initial stress of not more than 70% of the 0,2% proof stress.
No prestressing wires shall be exposed when the posts are erected in concrete.
The posts are designed to resist a minimum bending moment of 2,5kNm in any position before initial failure occurs.
(Note: The force required to break a post so that it does not fully recover is considerably greater than the above specification.)
The posts are tapered from top to bottom.
The top of the post shall measure 80mm x 80mm nominal. The bottom of the post shall measure 110mm x 110mm nominal. The overall length of the post shall be 3000mm.
The top of the post shall be rabbeted to form a 70mm x 70mm x 6mm tenon to accommodate specially designed street name signs.
Specification for Precast Street Name Signs
As per specification for Road Signs.
The sign blades shall measure 150mm x 70mm wide with a variable length. The bottom of the sign blade shall be recessed to accommodate another sign blade so that two signs can be erected on one post at right angles to each other.
The sign blades shall be double sided and reinforced with four centrally positioned 3mm high tensile wires.
The sign face shall be painted with SABS approved yellow road marking paint for the background and black enamel or black road marking paint for the stencilled letters. Alternatively, the sign face can be manufactured from 3M® Scotchlite™ materials as per the specification for Road Signs.
The sign posts shall be as per the above specification for Sign Posts.
Attaching brackets and bolts shall be zinc electroplated or hot dipped galvanised steel as required.
SALES EASTERN CAPE
+27 (0) 71 290 9703 (Cell)
+27 (0) 41 991 0622 (Tel)
+27 (0) 41 991 0636 (Fax)
Street Name Signs Port Elizabeth | Street Name Signs Uitenhage | Street Name Signs Cape Town | Street Name Signs Johannesburg | Street Name Signs Durban | Street Name Signs Bloemfontein | Prestressed Concrete Fencing Posts Port Elizabeth | Prestressed Concrete Fencing Posts Uitenhage | Prestressed Concrete Fencing Posts Cape Town | Prestressed Concrete Fencing Posts Johannesburg | Prestressed Concrete Fencing Posts Durban | Prestressed Concrete Fencing Posts Bloemfontein Prestressed | Concrete Fencing Posts | Concrete Fencing Posts | Concrete Fencing Poles | Concrete Fencing Posts for Wire Mesh Fencing | Prestressed Fencing Posts | Posts for Fencing | High Quality Fencing Posts | Street Name Signs | Concrete Street Name Posts | Prestressed Concrete Street Name Posts
SALES WESTERN CAPE
+27 (0) 60 997 6199 (Cell)
CAVCON MANUFACTURING PLANT
8 Brickfields Road
Alexander Park Industrial
South Africa, 6229
P.O. Box 328
South Africa, 6230